Skip to content

Under Sink Water Filters

An under sink water filter sits in the cabinet and treats the water at one tap. Work out which stages you need, which tap suits your sink and how much cabinet space you have, then compare the range.

Single, twin and three stage systems Fluoride and PFAS focused options DIY install kit supplied Replacement cartridges available
Showing 9 of 9 products

Choosing an under sink water filter

An under sink filter treats the water at one tap, usually the kitchen. It does not treat the shower, the laundry or the rest of the house, so it suits drinking and cooking water. If you want every tap treated, look at a whole house system instead.

Start with what is in your water. Carbon is the stage that deals with chlorine taste and smell on treated town water. A sediment stage in front of it catches grit and silt, which matters more on tank or rainwater supply because it protects the cartridges behind it. Fluoride needs its own media, such as activated alumina, and a PFAS stage needs a cartridge that has been tested for PFAS, so check the certification rather than the marketing. None of these stages change the dissolved minerals in your water. Hard water and total dissolved solids are a job for a softener or a reverse osmosis system.

Then choose the tap. A dedicated filter tap sits beside your kitchen mixer and needs its own hole in the bench or sink. A 3 way mixer tap replaces your kitchen mixer and delivers filtered water through its own outlet, so there is nothing extra on the bench. Renters often prefer that route because the original tap can be refitted at the end of the lease.

Finally, measure the cabinet. AquaCo states its systems mount horizontally or vertically under the bench, but you still need room to reach the cartridges when they are due for a change. Plumbing rules differ by state and territory, so check whether a licensed plumber is required for your install.

Home & Harvest Hub stocks AquaCo under sink systems in single, twin and three stage configurations, with carbon, sediment, fluoride and Disruptor stages in different combinations, plus two five stage reverse osmosis systems. Replacement cartridges are available separately.
Looking for something else?

Frequently asked questions

Is an under sink water filter worth it?
It is worth it if your main goal is better drinking and cooking water at the kitchen tap. It treats one tap only, so it is a different job from a whole house system, and it does not soften water or lower dissolved solids.
How much does an under sink water filter cost?
The AquaCo systems here run from $214 for a single stage carbon filter to $545 for a three stage system with sediment, fluoride and Disruptor stages. Reverse osmosis systems cost more. Installation and replacement cartridges are extra.
Should I choose a single, twin or three stage system?
A single stage suits clean treated mains water where taste is the aim. A twin adds a second job, often a sediment stage in front of the main cartridge. A three stage adds a third, such as sediment, fluoride and carbon, and suits tank water or households with more than one concern.
Do under sink filters remove fluoride or PFAS?
Only systems with a stage built for it. AquaCo states its activated alumina stage reduces fluoride and its Disruptor cartridge is certified to reduce PFOA and PFOS. Check the stages listed on each product page.
Can I install an under sink water filter myself?
AquaCo supplies tools and components for DIY installation with its under sink systems. Plumbing rules differ by state and territory, so check whether a licensed plumber is required for your install.
How often do the cartridges need replacing?
On the interval AquaCo specifies for each cartridge, which depends on your water and how much you use. Replacement cartridges are available separately.