Skip to content

Water Softeners

A water softener treats hardness, the calcium and magnesium behind scale and spotty glass. Check your water hardness first, then the flow rate, salt and drain needs before you buy.

Fully automatic regeneration 28 litre resin tank 40 LPM flow rate (AquaCo) Three pre-filtration options
Showing 3 of 3 products

Choosing a whole house water softener

A water softener and a water filter do different jobs. A filter removes particles and chemicals. A softener removes hardness, the dissolved calcium and magnesium that leave scale in kettles, hot water systems and taps. If scale is your problem, a filter will not fix it.

Start by finding your hardness. Your water utility publishes it as milligrams per litre of calcium carbonate, and it varies by suburb. The Australian Drinking Water Guidelines set 200 mg/L as the aesthetic guideline value, the point where taste and scale typically become noticeable, not a health limit. If your water is already soft, a softener adds cost for little gain.

A salt based softener works by ion exchange. Water passes through a resin bed that swaps calcium and magnesium for sodium, and the resin is regenerated with a salt brine from time to time. That means you need a supply of softener salt, a drain connection for the brine and power for the control head. The trade off is a small amount of added sodium and the ongoing cost of salt. Size the system to the household, because the flow rate has to cover your peak demand and the resin capacity sets how often it regenerates.

Pre-filtration matters too. AquaCo notes that chlorine and oxidising agents degrade the resin, so each system here is paired with sediment and carbon cartridges ahead of the softener. Installation is plumbing work on the mains line where water enters the home, so use a licensed plumber and follow local requirements.

Home & Harvest Hub stocks the AquaCo SEV17, a fully automatic softener with a 28 litre ion exchange resin tank. AquaCo states it regenerates every 17,000 litres at 100 mg/L hardness and has a flow rate of 40 LPM. It comes with Classic, Premium or PFAS pre-filtration.
Looking for something else?

Frequently asked questions

Do I need a water softener?
Only if your water is hard enough to cause problems. Check your utility's hardness figure. If scale builds up quickly on kettles, taps and glass and your water sits in the hard range, above about 120 mg/L, a softener is worth pricing.
Does a water softener filter my water?
The softener itself treats hardness only. The pre-filtration cartridges ahead of it cover sediment and chlorine, and the PFAS option uses AquaCo's PFAS pre-filtration. AquaCo notes that fluoride is better handled by reverse osmosis.
What does a water softener need to run?
A supply of softener salt, a drain connection for the regeneration brine, power for the control head and a connection to the mains line. Installation is plumbing work, so use a licensed plumber.
How long does the resin last?
AquaCo states resin life of up to 10 years with proper maintenance. Regeneration settings depend on your water hardness and how much water you use.
Can I install a water softener myself?
It connects to the mains line where water enters the home, so use a licensed plumber and follow local requirements.