AquaCo · Water Filters
AquaCo Premium PFAS Three Stage Whole House Water Filter
$2,795.00
In stock
Free 30-day returns if it's not right for you — see our returns policy.
One filter, every tap
Filter every tap in the house with AquaCo's three-stage whole-house system, now including PFAS reduction through their Disruptor filter media. Sediment, chlorine, chloramines and PFAS compounds are removed before water reaches your taps, shower and appliances. Stainless steel bracket, frame and cover.
199+
Contaminants reduced
98.9%
PFAS compounds (PFOA)
99.3%
Lead and copper
60 LPM
Flow, unrestricted showers
- Stops limescale building up in taps, kettles and hot water systems
- No chlorine smell or taste anywhere in the house
- Works on town water, rainwater tanks and bore water (test required for bore/rain - see FAQ)
- Stainless steel cover shields the housings from sun and knocks
Three stages, seven layers
Water passes through all three stages before it reaches a single tap in the house. Sediment, rust and dirt come out first; a coconut carbon block strips chlorine, taste and odour next; and the Disruptor filter finishes the job, a 4-in-1 stage (mechanical, adsorption, electroadsorption and bacteriostatic filtration) that pulls out PFAS compounds, heavy metals and pathogens. Independently lab-tested, not just claimed.
Stage 1
Triple-gradient sediment + ScaleStop
20, 10 then 5 micron layers
Catch grit and rust, plus a ScaleStop core that stops calcium locking onto your pipes
More info
Stage 2
Coconut shell carbon block
Chlorine, taste and odour
Takes out chlorine, chloramines and the smell that comes with treated mains water
More info
Stage 3
2-micron Disruptor filter
PFAS and heavy metals
Catalytic carbon for PFAS and heavy metals, over a membrane whose electrostatic field pulls out bacteria, viruses and parasites without going submicron
More info
Certified and independently tested
Every claim on this page comes from laboratory testing on the filter media, not from us.
Key claims & results
PFAS ("Forever Chemicals")
- Removes >97.6% PFOA
- Removes >99.0% PFOS
Tested using US EPA 537 methods for PFAS in drinking water.
Chlorine & Chloramines
- Removes >95.7% total chlorine (incl. chloramines)
- Removes 99.5% free chlorine
Tested following NSF/ANSI 42 performance protocols and GB/T 5750.11-2023 drinking water test methods.
Heavy Metals
- Removes >99.5% lead (at pH 6.5)
- Removes >99.9% copper
Tested using EPA Method 200.8 and Chinese Ministry of Health hygienic function standards for drinking water devices.
Bacteria & Viruses
- Removes >99.9999% total coliforms (bacteria)
- Removes 99.9995% MS2 coliphage (bacterial virus)
Tested to GB/T 5750.12-2023 microbiological standards and EPA Method 1602 for MS2 coliphage.
Certifications
WaterMark Approved
Required under the Plumbing Code of Australia for any product connected to the water supply. It means the system has been independently assessed against Australian Standards, so a plumber can legally install it.
Verify →
NSF/ANSI 42 Listed
NSF is one of the most respected independent testing bodies in water treatment worldwide. The filter media is independently listed to NSF/ANSI 42 for chlorine, taste and odour reduction - tested by an accredited third-party lab, not just AquaCo's own word.
Verify →Sidewall or garage, on the mains before it branches
It installs once, at the mains water inlet, before the line splits to the rest of the house. A licensed plumber connects it to either an external sidewall or inside the garage, whichever suits the property.
Sidewall
Garage
Where it goes
On the mains after the meter, before the line branches, at an external sidewall or inside the garage
Space needed
150mm clearance on the sides and below for maintenance (per AquaCo's install guide)
A plumber's job
Connects at the mains water inlet. A licensed plumber is recommended
Pressure
Runs up to 70 PSI (480 kPa). A Pressure Limiting Valve is required above that
AquaCo Premium PFAS Whole House Water Filter
Specifications
| Capacity | 300,000 litres |
|---|---|
| Casing size | 20" x 4.5" |
| Filtration stages | 3 |
| Maximum flow rate | 60 LPM |
| Operating pressure | Up to 70 PSI (480 kPa) |
| Maximum pressure | 90 PSI |
| Operating temperature | 0.5°C-60°C |
| System dimensions | 680mm x 800mm x 290mm |
| Power required | None. Passive, mains pressure fed. |
Brochures, guides & reports
Frequently Asked Questions
Do I need a licensed plumber to install this?
Yes. This system connects at your home's mains water inlet, so installation should be done by a licensed plumber. It comes with pressure gauges pre-fitted and a spanner for filter changes, but the initial mains connection isn't a DIY job.
Is it suitable for rainwater or bore water, or just mains water?
It's built for standard mains/town water supply. Rainwater or bore water can work too, but AquaCo requires a water test first to confirm it's suitable for your specific supply before installing.
How often do the filters need replacing?
AquaCo recommends changing the 20" x 4.5" filter cartridges every 12-18 months, depending on your water quality and usage. The system is rated to 300,000 litres capacity.
What's actually different about the PFAS Disruptor stage?
It's the third filtration stage, lab-tested (SGS) to remove over 97.6% PFOA and 99.0% PFOS ("forever chemicals"), on top of the sediment and carbon stages that handle chlorine, taste and odour.
What's the warranty?
A 2-year manufacturer's warranty from AquaCo, covering parts for defects in materials and workmanship.
Can I return it if I change my mind?
Yes, within our standard return window. See our returns policy for the exact terms and how to start a return.
$2,795.00